Memorex MD6441 manual To Program the Memory UP to 24 Tracks

CD OPERATION (CONTINUED)

TO PROGRAM THE MEMORY (UP TO 24 TRACKS)

1			2
3	2	1	1	2

With a CD inserted, press the
PLAY/PAUSE (®p)/POWER ON button 1	Select the first track to be played back
to turn the unit on and press the STOP	using the Skip/Search o 1 or n ❷
(■)/POWER OFF button 2 to stop auto	button, then press the PROG button 3
playback. Press the PROG button 3; the
	again. Repeat this step to program
Track (00), program number (P-01) and
	additional tracks up to a maximum of
PROG indicator will appear in the CD
	24 tracks.
display.

3	1
3	2

4
1	2

Press the PLAY/PAUSE (®p) /POWER ON button 1 to begin Programmed playback and adjust the VOLUME control 2 and DBBS switch 3 as desired.

To skip forward or backward through the programs, press the Skip/Search o 1 or n ❷ button. When the disc is through playing, it will stop.

NOTES:

•Press the STOP (■)/POWER OFF button to stop the disc before it is finished.

•As each program is played, the track number is shown in the display.

•To clear the memorized program, while in the stop mode, press the PROG button followed by the STOP (■)/POWER OFF button.

•Programming is the ability to preselect the order in which a series of tracks will be played.

•Each track may be stored in the program memory as many times as desired (up to 24 tracks).

•If the unit is off or the CD compartment is opened, the memorized program will be erased.

14