Memorex MD6441 manual Radio Operation To Listen to the Radio

	RADIO OPERATION
TO LISTEN TO THE RADIO
1	2	3
	2	2
	1
	1

Set the VOLUME control 1 to minimum and plug the headphones into the PHONES jack. Press the PLAY/PAUSE (®p)/POWER ON button 2 to turn the unit on.

Slide the FUNCTION switch 1 to the RADIO position. Press the ESP/BAND button 2 to select a band (AM or FM).

If listening to FM, press the MODE button

❸to turn FM Stereo ON or OFF.

3
1	2

4	3
	1
	2

Press and release the Skip/Search/ Tuning o 1 or n 2 button to tune a station. Press and hold the Skip/Search/ Tuning o 1 or n 2 button for Auto Scan (see below).

5

To turn the radio off, press the STOP (■)/POWER OFF button.

Adjust the VOLUME control 1 and DBBS switch 2 as desired. If FM STEREO reception is weak/noisy, press the MODE button 3 to turn off Stereo, in this case the reception will be monaural.

ANTENNAS

AM–This unit has a built-in ferrite bar antenna, which provides adequate reception in most areas. If reception is weak, turn the unit to improve reception.

FM–The headphones act as an antenna for FM. Extend the headphone wire for best FM reception.

AUTO SCAN

Press and hold the Skip/Search/Tuning o or n button for approximately one second and the unit will automatically search for the next available station.

7