MP3122 O/M.QXD 8/12/02 11:24 AM Page 9
COMPACT DISC (CD) OPERATION (CONTINUED)
TO PROGRAM THE MEMORY (UP TO 32 TRACKS)
1 |
2 |
3 |
|
2 | 1 |
|
Slide the FUNCTION switch to the CD position; the POWER ON indicator will light. Insert a CD as described in the TO INSERT A CD section on page 6.
Press the PROGRAM button, the Program indicator will blink.
Use the SKIP/Search 
❶ or 
❷ button to select the first
track to be programmed.
4 |
5 |
6 |
Press the PROGRAM button again; the selected track has now been programmed and counted as program 1.
Repeat steps 3 and 4 to program the other desired tracks in sequence (up to 32 tracks).
Press the PLAY/ PAUSE (❿/ 
) button to begin playback; the Program indicator will light and the tracks will play in the order programmed.
NOTES
•Programming is the ability to preselect the order in which a series of tracks will be played.
•Each track may be stored in the program memory as many times as desired (up to 32 tracks).
•As each track is played, its track number will be displayed. You can move forward or backward through
the programmed tracks with the SKIP/Search 
or 
button.
•The CD player will stop after all programmed tracks have been played or the STOP (■) button is pressed. If the STOP (■) button was pressed, the programmed tracks will remain in memory. Simply press the PLAY/PAUSE (❿/
) button to continue Program playback.
•To cancel Program playback, press the PROGRAM button to enter the Program mode and then press the STOP (■) button, or open the CD door.
•When 32 tracks have been programmed, the CD memory is full (“Fu” will appear in the display).
9