MP3122 O/M.QXD 8/12/02 11:24 AM Page 12
CARE AND MAINTENANCEbforside2
SAFEGUARD AGAINST ACCIDENTAL ERASURE
When a new recording is made, any program | a |
|
|
material previously recorded is automatically |
|
| |
erased and only the new recording remains. To |
|
| |
safeguard valuable recordings from being erased |
|
| |
accidentally, the cassette and the deck are |
|
| |
equipped with a special device. |
| Breakoutthetab | |
On the back of the cassette there is an erase |
| Tab | Tabforside1 |
prevention tab on each side. To prevent |
| ||
accidental erasing, break out these tabs with a |
| ||
screwdriver. If only one side of the tape is to be |
| ||
protected, break out the tab on the left side with |
| ||
the side desired facing you. |
|
|
|
To record on a tape in which the tab has been |
|
|
|
broken, place a piece of adhesive tape over that |
|
| Coverwithtapetorecordagain |
area. |
|
| topreventrecording |
NOTE: When a tab is broken out, the record |
|
| |
button cannot be depressed. |
|
|
|
CASSETTE TAPE RECOMMENDATIONS
Standard tape lengths have 15
If there is any slack in the cassette, it should be removed before inserting the cassette. Place a pencil in one of the hubs and rotate it clockwise until all slack is taken up.
12