TROUBLE SHOOTING (Helpful Hints)
SHOULD YOUR SET EXHIBIT A PROBLEM, CHECK THE FOLLOWING BEFORE SEEKING SERVICE.
SYMPTOM
Alarm does not come on in the morning.
| CAUSE | SOLUTION | ||
AM or PM not set |
| |||
correctly. Is alarm | Advance the clock 12 | |||
time set in AM range | hours. | |||
(PM Lamp off)? |
| |||
FUNCTION switch is | Set the FUNCTION | |||
in OFF position. | switch to AUTO or BUZZ | |||
Are | the | ALARM | ||
position. | ||||
INDICATORS off? |
| |||
ALARM SET switch is | Recheck the ALARM 1 & | |||
ALARM 2 times, and make | ||||
not | in the | proper | sure the proper ALARM | |
position. |
| indicator is turn on. | ||
|
|
| ||
FM is distorted and weak.
Noise or weak sound on AM broadcast.
FM antenna wire is not extended.
Station not tuned in properly.
Weak broadcast station.
Signal is blocked.
External interference.
Extend FM antenna wire.
Tune to desired station carefully.
Turn to a stronger station.
Rotate the set to receive better signal.
Turn the radio for better AM reception or bring set near a window.
Radio no sound.
FUNCTION switch is Slide the FUNCTION in the OFF position. switch to ON position.
VOLUME control set Rotate VOLUME control to minimum position. for desired sound.
The clock is flashing.
Clock is dead.
The clock is not set.
A power failure has occurred.
The set’s AC cord is not connected.
Set the clock and alarm time.
Reset the clock alarm time and time of the day.
Connect set’s AC cord and make sure outlet has power.
LENOXX reserves the right to make design and specification changes for product improvement.
PROTECT YOUR FINE FURNITURE!
WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED UNDER THE SET WHEN PLACING IT ON SURFACE WITH A NATURAL OR LACQUER FINISH.
6