7.Press the “DEFAULT” button for background music. Press the “
” to mute. Press “DEFAULT” or “
T’ again or the volume button to resume normal play.
8.The “STANDBY” button will switch the AIP unit on and will also put the unit into standby mode. This will be indicated by a flashing light.
9.After using the AIP unit, please flick the switch to the “OFF” position at the back of the unit, then remove external devices.
10.To use an external music source (i.e. Laptop). Connect it to the AIP input jack and press the “AUX” button on the remote. If you don’t connect iPod on AIP, the AIP will choose the external source automatically.
Note:
This AIP unit is compatible with iPod touch, iPod classic, iPod nano, iPod 5th gen, iPod 4th gen, iPod mini.
SPECIFICATIONS:
Product model |
|
|
|
Amplifier output power | left/right 4W x 2, subwoofer 15W x 1 |
|
|
Amplifier input sensitivity | ≤ 400mV |
|
|
Amplifier SNR | ≥ 82dB |
|
|
Amplifier Distortion | ≤ 0.7% |
|
|
Frequency response | 60Hz~20KHz |
|
|
Speaker units | tweeter ø 35mm, subwoofer ø 94mm |
|
|
Power voltage | |
|
|
6 | 7 |