** | ** |
** |
|
| Setting Up The HFA100 |
Guided Setup
** |
** |
When you enter this menu, you will first be prompted for English or Spanish language menus. After you make your selection and enter OK, you will be asked for your time zone. Scroll through the available choices to highlight your time zone and push OK.
The next menu will ask you if Daylight Savings Time is observed in your area. Select ON or OFF as required (or select AUTO if you aren’t sure), then press OK.
Now you are ready to scan for active digital TV broadcasts. The SCAN CHANNELS menu will appear. Make sure your antenna is connected to the RF input jack on the rear of the HFA100, select START, and push OK.
The HFA100 will scan channels 2 through 69 and save any active DTV channels it finds into memory, along with electronic program guide (EPG) information for each channel. This process will take several minutes and a progress bar will show you when it is complete.
Push OK to step to the Channel Edit menu. Here, you can save or delete channels as you wish from the previous channel scan. Push OK when done.
You will now see the SETUP COMPLETED menu. This menu will show you your time zone and daylight savings selections as well as the total number of digital TV programs detected and saved into memory. Select DONE to leave this menu and start watching digital TV broadcasts.
**
**
**
14
**
**
**
**
**