JBL EON10 manual Basic Sound Reinforcement System With Stage Monitors

Page 12

Basic Sound Reinforcement System With Stage Monitors

This is the basic live sound system. The optional tripod stands will get the speakers up above the audience so the sound can project. The second pair of EON10 G2 speakers are used as stage monitors. For maximum gain before feedback, position the monitors so that they do not point into microphones.

The output connectors on your mixer may differ from the illustration.

INPUT 1

 

INPUT 1

 

 

 

 

 

 

 

 

 

 

TYPICAL MIXER INPUT / OUTPUT PANEL

DJ or Sound Reinforcement System with EONSUB G2

Here’s a system with EONSUB G2 added to provide additional low-frequency power. If your mixer has a SUM or MONO output, you can also drive the EONSUB G2 from this output and use the SUM or MONO volume control for independent control of bass.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents EON10 G2 User Guide Page Contents Package Contents WelcomePlacement Precautions Electrical SafetyFloor and Table Top Application Features SpecificationsAbout The EON10 G2 ApplicationsFrequency Reponse Available Accessories Block DiagramPower UP Procedure Quick StartConnectors Indicators Application Examples One Piece PA SystemBasic Sound Reinforcement System With Stage Monitors DJ or Sound Reinforcement System with Eonsub G2Troubleshooting DJ System with Passive SubwoofersAudio signal Improper A/C ground or faulty Reference Gain StructureLoudspeaker Placement and Mounting Connections Balanced and UnbalancedCables and Connectors XLR/F to XLR/M Microphone CablePage JBL Limited Warranty Contact Information
Top Page Image Contents