Click “Finish”.
The installation is completed.
Note: the iHP Manager software will not install an icon on the computer desktop and it does not have a user interface screen. iHP Manager adds the ability to create the DB file as described on page 24."
TO CONNECT THE IHP TO THE HOST PC
Click 
to turn on the player.
Connect the USB cable to the player and the host PC.
|
| To PC |
Type “A” |
|
|
|
| Type “A” |
| Type “B” | To iHP |
| USB cable | |
| USB port on |
|
USB port on the PC | the player | Type “B” |
Windows XP and Windows 2000 will display a "Device Attached" icon.
Note
Windows may ask to install a driver for the iHP. Please follow the provided driver installation guide on the following page.
Once installed, open Windows Explorer and an additional drive should be listed called
TO INSTALL THE IHP DEVICE DRIVER | (Note: Windows 98SE |
| and Windows Me only.) |
|
Complete the driver installation after installing the iHP Manager software.
Connect the player to your PC, | Chose "Search for the best driver |
Windows will display the "Add New | for your device (Recommended)." |
Hardware Wizard. Click Next. | Click Next. |
Place a checkmark next to | Locate the following path on your |
"Specify a location" and click | computer. C:\Program Files\ |
Browse. | iRiver\iHP 100\drivers, click “OK”. |
Once the path has been located, | Click “Next” |
Click “Next”. |
|
Click “Finish”
The installation of the Device Driver is complete.
10 | 11 |