![](/images/new-backgrounds/1257084/25708437x1.webp)
After the audio and video cables are connected simply plug in the power adapter, and turn on the drive using the power button on the drive or remote control. After a few seconds the blue power light on the drive should stop blinking and you should see the media drive interface on your screen. If you do not, please press the video mode button on the drive (see reference above) until you see a clear picture.
If you prefer, you may also press the Menu and Fast Forward buttons on the remote
simultaneously to do the same thing. This will cycle the unit through available output modes until you find one that is supported by your display.
19