1.Enter the system settings menu 2. Press the 
button to
select ”Back time”
3.Press “Mode” enter the setting as shown below:
4. Press “
/ 
” buttons to
set the time.
5.Press the “Mode” button to confirm and exit.
ż Setting “Language”. Please, operate in a similar fashion as the “Back time” setting.
żSetting “Power off“. The same as the “Back time”. There are two settings here:
Off time: Set your
Sleep time: Set your sleep mode time, the unit is in minutes, the max setting is 120
minutes.
żSettings “Replay mode”/ “Contrast”/“Online mode”. The same as the “Back time”.
ż“Memory Info.” Shows the percentage of the disk storage space which is currently used and free.
ż“Firmware Version”. Displays the current Firmware Version.
ż“Firmware Update”. Use this setting only if you want to perform the firmware update.
Press “Mode” button to confirm your setting, then press “Play/Pause” button to exit the
submenu.