3.2Install 
Important
Make sure to install the software provided in the supplied CD for music transfer.
System requirements:
•Windows XP (SP2 or above)
•Pentium Class 300MHz processor or higher
•128MB RAM
•500MB hard disk space
•Internet connection (preferable)
•Microsoft Internet Explorer 6.0 or later
•USB port
1Insert the CD supplied with your product into the CD ROM drive of your PC.
2Follow the
3If the installation program does not start automatically, browse the CD contents with Windows Explorer and run the program by double clicking on the file ending with .exe.
Lost your CD? Don’t worry, you can download the CD contents from www.philips.com/support or www.philips.com/usasupport (for U.S. residents).
3.3Connect
3.3.1Insert the battery
1Remove the battery door by sliding it in the direction of arrow.
2Insert the supplied AAA battery into the battery compartment.
3.3.2Read the battery level indication of your player The approximate power levels of your battery are indicated as follows:
Full | Half full | Low | Empty |
Note
When the batteries are almost empty, the low battery screen 
blinks. Your player will power down in less than 60 seconds. Your player will save all settings and
3.4Transfer
You can transfer music to your player using Windows Media Player or Window Explorer. See Organize and transfer music with Windows Media Player 10 section of this user
manual for more details.
3.5Enjoy
3.5.1Power on and off
To power on, press 2; until the Philips welcome screen appears. To power off, press and hold 2; until there is no display on the screen.
Tip
Your player automatically powers down if there is no operation and no music played for 3 minutes.
3.5.2Navigate the menu
Your player has an intuitive menu navigation system to guide you through various settings and operations. Use J( and )K to browse through menus. Press 2; to confirm your selection. You can press MENU to access the menu and return to previous level.
When your player powers up, you can see the Root menu. It includes:
Music | Play your digital music tracks |
Recordings | Play your recordings |
Settings | Change the playmode, equalizer, backlight or |
| language settings, display the player information |
|
|
4Organize and transfer music with Windows Media Player 10
This chapter describes the steps that you have to follow in order to successfully transfer music to your player. For more information, see Windows Media Player (WMP) Help on your computer.
Important
Make sure you have installed the software provided in the supplied CD for music transfer.
4.1Music transfer
You can add songs, organize songs into your playlists and manage your playlist using Windows Media Player 10.
Tip
We recommend that you always use Windows Media Player to transfer music to your player. However, if you prefer to use Windows Explorer, always make sure to copy your music into the Media folder, otherwise the songs will neither show nor play on your player.
4.1.1Add songs to Windows Media Player Library
Songs that are already on your computer
1Start Windows Media Player by double clicking the following icon on your desktop.
ENGLISH
Getting started | 5 |