Gemini GX-400 Introduction Features, Line Voltage Selection, Connections, Set-Up, Specifications

Page 6

INTRODUCTION:

Congratulations on your purchase of a Gemini product. Your product is a state of the art unit, backed by a 1 year limited warranty. With proper care and maintenance, your unit will provide years of reliable service. Please register yopur product online at http://www.geminidj.com or using the included form at the end of this manual.

FEATURES:

All GX Speakers Come With Stand Mounts to Turn Your Speakers Into Stage Monitors. All GX Speakers Have the Following:

• Aluminum Die-Cast Woofer

• Stand Mounting Socket •

Auxiliary Line Outputs

• Metal Corners/Full Metal Grill

• High Temp Voice Coil

• Rigging Points

• Rubber Feet

• Stacking Grooves

• Easy Carry Handles

GX-300:

 

 

 

 

• 12” Two Way Loudspeaker

• Compression Driver with 1.5” Titanium Diaphragm

• 1/4” & Speakon Inputs

 

• Frequency Response 40-22 KHz

• 200 Wrms, 800 Watts Peak Power

• 1/4” & Speakon

TM Outputs

GX-400:

 

 

 

 

• 15” Two Way Loudspeaker

• Compression Driver with 1.75” Titanium Diaphragm

• 1/4” & Speakon Inputs

 

• Frequency Response 30-22 KHz

• 300 Wrms, 1000 Watts Peak Power

• 1/4” & Speakon

TM Outputs

GX-350:

 

 

 

 

• Powered 12” Two Way Loudspeaker

 

• Bass & Treble Controls

• Compression Driver with 1.5” Titanium Diaphragm

• 1/4” & XLR Line Outputs

• XLR & RCA Line Inputs

 

 

•

Frequency Response 40-22 KHz

• Built-In Mixer with XLR & 1/4” Mic Input

 

 

• Clip & Power LED

• 200 Wrms, 800 Watts Peak Power

 

 

 

GX-450:

 

 

 

 

• Powered 15” Two Way Loudspeaker

 

• Bass & Treble Controls

• Compression Driver with 1.75” Titanium Diaphragm

• 1/4” & XLR Line Outputs

• XLR & RCA Line Inputs

 

 

•

Frequency Response 30-22 KHz

• Built-In Mixer with XLR & 1/4” Mic Input

 

 

• Clip & Power LED

• 300 Wrms, 1000 Watts Peak Power

 

 

 

CAUTIONS:

1.All operating instructions should be read before using this equipment.

2.To reduce the risk of electrical shock, do not open the unit. There are,

NO USER REPLACEABLE PARTS INSIDE

. Please refer servicing to a

qualified Gemini Sound Products service technician.

In the USA: If you experience problems with this unit, please call 1 (732) 738-9003 for

Gemini Customer Service.

Do not attempt to return this equipment to your dealer.

3.Do not expose this unit to direct sunlight or to a heat source such as a radiator or stove.

4.This unit should be cleaned only with a damp cloth. Avoid solvents or other cleaning detergents.

5.When moving this equipment, it should be placed in its original carton and packaging. This will reduce the risk of damage during transit.

6.

DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE

.

7.

DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON ANY

 

 

CONTROLS OR SWITCHES

.

 

LINE VOLTAGE SELECTION:

The GEMINI GX-350/450speakers are a dual voltage unit operating at

115 or 230 volts. Be sure to set the proper voltage:

1.Place the head of a screwdriver in the center of theVOLTAGE SELECTOR (24) switch found on the rear panel.

2.Slide the switch to 115 or 230 volts.

3.Do not force or twist the switch. Excessive force may cause damage. If the switch does not move smoothly, contact a qualified technician.

CONNECTIONS:

Make sure ALL your equipment is completely OFF and lower ALL

VOLUME, LEVEL, & GAIN controls and before connecting the speaker.

1. For the GX-300/400 use a SPEAKON TM CABLE from your AMPLIFIER LINE OUTPUT to the SPEAKON TM INPUT JACK (6) .

2.

For the GX-350/450you can connect a MIXER

or MICROPHONES

 

 

directly into your speaker. For your MIXER

you can use either, a

 

 

BALANCED 1/4”/XLR

to XLR CABLE,

or standard RCA CABLES,

using

 

the RCA (11)

or XLR (12) INPUTS

to plug into the speaker. To connect a

 

MICROPHONES

you can use MIC 1 or MIC 2 with 1/4” or XLR CABLE

 

to plug into the 1/4” (9)

or XLR (10) INPUTS .

 

 

 

NOTE: ONLY THE GX-450 SPEAKERS HAVE A MIC 2 INPUT!

 

 

 

 

 

3.

You can also use the AUXILIARY LINE OUTPUT JACKS (7, 13,

& 14) to

 

CHAIN-LINK

an additional speaker using an additional speaker CABLE .

NOTE: PLEASE REFER TO THE CONNECTIONS GUIDE FOR DETAILED DESCRIPTIONS!

 

 

OPERATION:

 

 

 

 

 

 

 

 

 

 

The speakers can be used in PAIRS

for a NORMAL setup, or in groups of

 

FOUR when CHAIN-LINKED

together.

 

 

 

 

 

 

GX-300/400:

 

 

 

 

 

 

 

 

 

1.

First turn on your MIXER or other signal source.

 

 

2.

Then turn on your AMPLIFIER

and increase the VOLUME

or GAIN

control

 

as recommended by the AMPLIFIERS

owner manual.

 

 

3.

Start playing from your TURNTABLE, CD PLAYER, MIC, etc

. and adjust

 

the volume controls from your mixer to a reasonable level.

 

 

 

GX-350/450:

 

 

 

 

 

 

 

 

 

1.

First turn on your MIXER/MICROPHONES

 

or other signal source, then

 

turn on your SPEAKER

, the POWER LED (22)

will be lit. Start playing

 

from your TURNTABLE, CD PLAYER, MIC, etc

 

. and adjust the volume

 

controls from your MIXER/MICROPHONES,

to a reasonable level.

 

2.

Use the MIC/LINE LEVEL (15, 16)

controls to adjust MIC 1 , MIC 2 (9, 10) ,

 

or LINE IN (11, 12)

levels. The MIC/LINE LEVEL (15, 16)

controls can be

 

used to adjust the level of the LINE OUT (13, 14)

signals as well.

 

3.Use the SPEAKER LEVEL (17) control to adjust the overall level of the

SPEAKER, and use the TREBLE (18) & BASS (19)

controls to adjust the

TREBLE & BASS

levels. If your MIC 1 /MIC 2 (9, 10), LINE LEVEL (11, 12),

or SPEAKER LEVEL (17)

is too loud or distorted the CLIP LED (23) will

be lit, at this point adjust your volume to an appropriate level.

CHAIN-LINK:

Only 1 additional speaker can be added to each speaker in a CHAIN- LINK setup. Connect your speakers first then follow the setup steps, your AMPLIFIER will compensate for the extra speakers.

SET-UP:

Use the provided mounting hardware for a STAGE MONITORING setup. Slide the plastic legs into the holes on the side of the speaker. Refer to the

SET-UP GUIDE for location. You can also use a SPEAKER STAND

by

inserting a stand into the STAND MOUNTING SOCKET (3),

tighten using

the LOCKING PIN (8).

Another way to setup the speaker is to use the

SPEAKER RIGGING POINTS (2),

mounting hardware should be used to

hang the speaker where appropriate. Speaker stands and mounting

 

hardware are available separately. The RUBBER FEET (4)

are for stacking

the speakers on top of each other within the STACKING GROOVES (1) located on the top portion of the speaker. Use the EASYCARRYHANDLE(5) for easy transportation.

SPECIFICATIONS:

SEE PAGE 10 FOR SPECIFICATIONS.

SHOULD YOU EXPERIENCE ANY DIFFICULTIES OR PROBLEMS, PLEASE CALL: 1 (732) 738-9003 FOR GEMINI CUSTOMER SERVICE.

(6)

Page 5 Page 7
Image 6
Page 5 Page 7
Contents GX-SERIES GX-SERIES Rear View GX-350/GX-450 only Master OuputsMixer Setup Guide Line Voltage Selection Introduction FeaturesSpecifications ConnectionsWahl DER Netzspannung VOLUME, LevelEinführung Funktionen AnschlüssePrecauiones IntroducciónCaractéristiques Selección DEL Voltaje DE LínealAvertissements InstallationIntroduction ConnexionsGX-300/350 GX-400/450 Page Do not attempt to return this equipment to your dealer

GX-450, GX-350, GX-400 specifications

The Gemini GX series of audio mixers, specifically the GX-400, GX-350, and GX-450, represents a significant advancement in the realm of professional audio equipment. Each model comes with its own set of features and technologies tailored to meet the demands of sound engineers, musicians, and performers.

The Gemini GX-400 is designed with versatility in mind. It features four channels, offering ample inputs for a range of audio sources. Each channel provides a three-band EQ that enables sound professionals to fine-tune their audio, creating the perfect mix for any setting. The GX-400 includes dual microphone inputs with phantom power, allowing for the use of condenser microphones. An onboard digital effects processor enhances the user experience, providing reverb, echo, and other effects to elevate the audio quality. The built-in USB interface allows for easy connection to computers for recording and playback, making it an ideal choice for both live performances and studio work.

Moving on to the GX-350, this model is a compact yet powerful mixer suited for smaller venues or home studios. The GX-350 offers a three-channel configuration, also featuring a three-band EQ on each channel, ensuring that sound can be shaped effectively. Similar to the GX-400, it includes a microphone input with phantom power and also integrates a USB port for easy connectivity. The unit is designed with a rugged build, making it suitable for mobile use. Its lightweight design makes it an excellent choice for wedding DJs and solo artists who need a reliable, portable mixer.

Lastly, the GX-450 stands out with its enhanced capabilities aimed at professional users. It features five channels and provides independent control with a four-band EQ on select channels, offering more extensive sound shaping options. The GX-450 is equipped with advanced digital effects processing, giving users a wider range of effects to choose from for their audio production needs. Furthermore, it includes comprehensive LED level metering for real-time monitoring of audio levels, ensuring optimal mixing conditions.

All models in the Gemini GX series are designed with user-friendly interfaces, making them accessible for both beginners and seasoned professionals. They incorporate durable components to withstand the rigors of live performances. The series collectively embodies a commitment to quality and innovation, empowering users to create high-fidelity audio experiences across various settings. Whether for live shows, recordings, or practice sessions, the Gemini GX-400, GX-350, and GX-450 provide reliable performance and flexibility that audio professionals can depend on.
Top Page Image Contents