Master Volume/Fader Control Knob | Precision Power PAR-650 guide

retract with each press.

●IN and OUT Position - A knob is set to its in position when it is initially extended. To set a knob to its out position pull gently on the knob until a plainly-felt notched position is reached.

NOTE: DO NOT use excessive force when using the adjustment knobs or damage to their release mechanism can result.

1.Master Volume/Fader Control Knob

●IN/Volume - When in, this knob controls the overall volume of the system. It affects all line-level outputs to the amplifiers.

●OUT/FADER - When out, this knob controls the front to rear balance of the high-pass output jacks.

2.Input Source LED - The color of the LED indicates which input source is currently active.

●GREEN - Indicates Source 1 is active.

●RED - Indicates Source 2 is active.

●ORANGE - Indicates the control panel AUX is active.

3.Input Source Switch - This is a momentary push-button switch that will cycle through the three input sources by activating a new input source each time it is pressed.

NOTE: The EQ defaults to SRC 1 when the unit is switched on.

4.Subwoofer Volume Control

●IN/SUB VOLUME - When in, this knob controls the dedicated subwoofer output volume.

●OUT/SUB VOLUME - When out, this knob controls the low-pass