Major Operating Controls and Their Functions

Major Operating Controls and Their Functions

Mounting base

Camera mounting

plate

Fixing screw to be used for cover fall prevention

Hole for microphone cable

Microphone stand*

Decorative cover

Dome cover

*If a microphone is used, mount the microphone on the rubber-made microphone stand. Unless the microphone is used, cut the rubber with a nipper or conduct another treatment.

<Installation sample>

Roof space

Safety wire angle (Accessory)

Installations

Be sure to read "Precautions" on the page xx before installation. The Installation Guide of the network camera, WV-NS202, shall be read as well.

1. Remove the decorative cover.

qLoosen the fixing screw (unremov-

able) to be used for cover fall pre- vention.

Fixing screw to be used for cover fall prevention

w Unhook the decorative cover from the hooks (3 positions) of the cam- era mounting plate and remove the decorative cover by turning it coun- terclockwise.

e Take the inner shell out.

Hook

T N O R F

Safety wire (Accessory)

Ceiling mount bracket

T N O R F

Ceiling board

Dome cover

Decorative cover

WV-NS202

Inner shell

2.Remove the camera mounting plate. Remove the screws (M4, 3 positions) and remove the camera mounting plate by turning it counterclockwise. Disengage the portion (a) from the hole

(b) (2 positions).

Screw (M4)

(a)

Camera mount- ing plate

T N O R F

(b)

T N O R F