Time SET The time cannot be set when RDS is On

Figure 4

8.SLEEP: With the iYiYi sound system tuned to an FM or AM station, or with a docked iPod playing, press and hold for over 1.5 seconds to get 20 minutes of playback. An icon showing a ﬁgure in bed will appear on the display and the number “20” will appear momentarily (Fig. 4). A conﬁrmation beep will also be heard. After approximately 20 minutes the iYiYi sound system will turn off, the Sleep icon will disappear, and the clock will be displayed. You may press the Sleep button for another 20 minutes of playback if you wish. To prematurely deactivate the Sleep function during playback, press and hold the Sleep button. The Sleep icon will disappear from the display and a conﬁrmation beep will sound.

Figure 5	Figure 6	Figure 7

9.TIME SET (The time cannot be set when RDS is On):

Press and hold to set the clock. A beep will be heard to conﬁrm you have entered the Time Set mode. The hour will ﬂash ﬁrst (Fig. 5, 6 & 7). Rotate the Tune knob to change the hour. The “PM” designation will appear for afternoon/evening hours but there is no “AM” designation for morning hours. Press the Tune knob in to set the hour, then adjust the minutes. The minutes will not affect the hour setting. Press the Tune knob in again to store the minutes. Once the clock is set, press this button brieﬂy to temporarily display the clock while the unit is on. When an FM station is broadcasting RDS, press brieﬂy to set the clock automatically. The clock set icon will ﬂash and then remain on the display if the clock has been successfully set. This feature only works if the station includes a clock signal in the RDS data.

Note: Non-US models use a 24-hour clock format.

10.ALARM: Used in conjunction with the Time Set and Tune knob to set and activate the alarm. For more, see the section marked “Using the Alarm”.

11.IR SENSOR: Receives commands from the remote control. Do not block this sensor.

Figure 8

12.RDS: Brieﬂy press to display scrolling text information broadcast by FM radio stations (Fig. 8).

Note: Not all radio stations transmit an RDS signal. The RDS logo will show in the display regardless of whether an RDS signal is present or not. Press again to cancel RDS and the logo will disappear. RDS is not used on the AM band. For more, see “RDS”.

13.LIGHT SENSOR: Detects changes in the ambient light and automatically adjusts the display’s backlight. Do not block this sensor.

14.HEADPHONE OUTPUT (Front of dock): Connect headphones (not included) to this variable stereo output for private listening. The main speakers will be muted. The headphone volume is adjusted by rotating the volume knob. This jack accepts a 1/8" male stereo mini connector.