PDP2075 EN 4/28/04 2:19 PM Page 10
CD Player
EN | The display | Playback |
CD Player
Resume
EN
Note:
2 | 1 | 3 | 4 | 5 | 6 | 7 |
|
|
| R |
1 | YEAR | FOLDER PLAYLIST | |
ARTIS | ALBUM | GENRE | |
Press play/pause 
on the main unit or remote to start playback.
Reading DISC will appear on the display. Then, the total number of tracks and time of the CD will be displayed. If the disc compartment is empty or the disc cannot be read, No Disc will appear on the dis- play.
When you power off the unit, resume is automatically activated. It stores settings concerning playmode and EQ. When the unit is on again,it resumes to the original settings.
Skip / Search
Press 
to skip to the previous track. Press and hold to search backward in a
To prevent excessive bat- 
tery consumption, when fin-
ished all tracks or in stop state, the unit switches off automatically in all modes after no key has been activated for 30s.
1.Random playback
2.Repeat
3.SmartTrax disc is detected
4.Time display
5.Battery Indicator
6Key lock (remote control)
7.Key lock (main unit)
*For different playmode icons, please refer to the playmode section.
The Electronic Shock Protection (ESP) system prevents sound interruptions when impacts or vibrations occur. Electronic anti- shock consumes less power and increases the battery life. Therefore, the ESP func- tion is always on.
After many successive impacts, the buffer might be emptied causing a brief sound interruption for the memory to reload.
track.
Press 
to skip to the next track. Press and hold to search forward in a track.
Pause
During playback, press play/pause 
on the main unit to pause playback. The minutes and seconds flash when the play- back is paused.
Listening to a Compact Disc
Slide the open switch to the right to open the door. Insert a disc and press lightly on the centre to lock. Close the door.
Stop
Press stop 
on the main unit.
5 |
|
|
| 6 |