Introduction
Thank you for choosing TAPCO S•8 Studio Monitors by LOUD Technologies. The TAPCO product line hails back to the days of TAPCO Corporation, Greg Mackie’s fi rst company. TAPCO revolutionized
the audio industry back in 1969 with the very fi rst
In essence, TAPCO redefi ned the price/performance ratio and made
These versatile compact
The S•8 active studio monitors are packed with features and designed to produce transparent and uncolored sound for monitoring multitrack recordings and mixdowns. The
There are many benefi ts to integrating an active crossover, power amplifi ers, and drivers into a single cabinet, and we’ve taken full advantage of these benefi ts in the design of the S•8.
•The crossover point is designed so that the high and low frequency drivers are fed only the frequencies that they are best able to reproduce.
•The amplifi ers are designed to provide maximum acoustic output from the speakers, yet minimize the danger of speaker damage due to overdriving.
•The connecting wire between the amplifi er outputs and the drivers are kept to an absolute minimum so the damping factor of the amplifi er isn’t compromised by the resistance of long speaker cables.
•The acoustic sum of the outputs from the two drivers are optimized electronically, as well as physically, so the amplitude response is unity and the phase difference is minimal.
In short, all the complex interconnected components in the system are designed to work in harmony with each other to produce the best possible sound.
Here’s a quick look at all the features packed into the S•8 Studio Monitors:
•Flat frequency response (±3 dB, 40 Hz to 20 kHz)
•1” silk dome tweeter, fully magnetically shielded
•8” polypropylene cone woofer, fully magnetically shielded
•Convenient compact design, perfect for near- fi eld monitoring
•Ported, bass refl ex design for enhanced bass performance
•60 watt HF and 60 watt LF power amplifi ers
•
•Front panel clipping indicator
•
•
•Full magnetic shielding allows placement near computer monitors
•Balanced XLR and 1/4” TRS, and unbalanced RCA input connectors
•24 dB/octave crossover at 3 kHz
•Adjustable sensitivity control
•LF equalization provides +2 dB or +4 dB at 100 Hz and below
•HF equalization provides ±2 dB at 5 kHz and above
•Rear panel power switch with front panel indicating LED
TAPCO van (a.k.a. micro bus)
6