Operating the Clock Radio
Snooze Alarm Operation
This operation allows extra sleep time after the alarm is on. The alarm will turn off by pressing SNOOZE until the snooze period is over. Snooze function can be used repeatedly up to 2 hours. After this, the alarm will turn off until the next alarm conditions are met. Set the “quiet” period as follow:
1.Press and hold SNOOZE.
2.Press REV 
or FWD 
to set the “quiet” period (the default time is 9 min- utes) from 1 minute to 30 minutes. Re- lease the button, then the “quiet” period is set.
Seconds Time Display | EN |
The unit may display in seconds. |
|
1.Press REV 
or FWD 
to show sec- onds display.
2.Release REV 
or FWD 
to return to the hour and minute display.
Brightness control
You can adjust the backlight by adjusting the BRIGHTNESS switch at the back of the unit, there are two modes you may select from:
High — Stronger Backlight.
Low — Weaker Backlight.
9