Transcend Information TS2GMP330, TS8GMP330 Record Quality, Maximum Record Time / Quality Table

2.Use the / buttons to select MIC or Line-In and press to confirm.

Record Quality

The quality of an audio recording can be set to Low, Medium, or High. Higher recording quality settings require more memory space to save the recorded WAV files.

1.In the REC Settings menu, use the / to select the “Record Quality” and press .

2.Use / to switch between “Low”, “Medium”, or “High” and press to confirm.

Maximum Record Time / Quality Table

FM / Line-In

Recording

Sample rate	Channels	2GB
Low (8KHz)	2 (stereo)	64 hrs
Med (16KHz)	2 (stereo)	32 hrs
High (32KHz)	2 (stereo)	16 hrs

8GB

256hrs

128hrs

64hrs

MIC

Recording

Sample rate	Channels	2GB	4GB	8GB
Low (8KHz)	1 (mono)	128 hrs	256 hrs	512 hrs
Med (16KHz)	1 (mono)	64 hrs	128 hrs	256 hrs
High (32KHz)	1 (mono)	32 hrs	64 hrs	128 hrs

Note: The above recording times may not be possible if space is limited or the battery power is low.

FM Radio and Line-In are recorded in Stereo. MIC voice recordings are recorded in Mono.

VAD (Voice Activity Detection)

VAD allows the MP330 to make gapless voice recordings. This means during voice recording with the internal microphone, the player will only record when it detects voices. If the person(s) pauses or stops speaking, the MP330 will temporarily stop recording until the person(s) starts speaking again. This allows for more concise, easier to understand recordings and smaller recording files.

1.In the REC Settings menu, use / to select “VAD” and press .

2.Use / to switch between “Enable” or “Disable” and press .

23