Transcend Information TS2GMP650, TS4GMP650 user manual Connecting to a Computer︱

Connecting to a Computer︱

If you are using Windows Media Player 10 and want to play WMA-DRM10 music files, you must set the Digital Music Player’s Music Transfer Mode to MTP to transfer and synchronize music files between the computer and your MP650.

Transferring Files to the Digital Music Player

If you want to use your MP650 to listen to music other than the Radio, you must transfer MP3, WMA, or WMA-DRM10 music files to the player. When the MP650 is connected to a computer it is locked into transferring files. You will not be able to play or record any music at this time. Please disconnect your MP650 from the computer when you want to use the player.

1.Plug the small end of the USB cable into the Mini USB port on the Digital Music Player and plug the large end of the cable into an available USB port on your desktop or notebook computer. While the Digital Music Player is connected to a computer, it can only be used for transferring files. The MP650’s rechargeable Li-ion battery will begin charging.

Figure 5. Connecting to a Computer

2.When connected to a computer the MP650’s screen will display a “READY” message, indicating that files can be loaded onto the player.

You cannot play or record music when the MP650 is connected to a computer.

If you are using Windows® a new Removable Disk drive with a newly assigned drive letter representing the MP650 will appear in the My Computer window.

29