Tascam MP-VT1 owner manual Setup Menu Options

9 – Setup Menu Options

On the SETUP screen, you can make various MP-VT1 settings, as well as initialize or format the unit. Press the MENU key to open the MENU screen, and then select and open the SETUP item.

The following settings related to how the MP-VT1 operates and its display behaves can be made on the SETUP screen.

Cue and review speed

Use CUE/REV SPEED to determine how fast search occurs	Setting choices: x2, x4, x8 (factory setting), x10
when the ≤ and µ keys are pushed and held.

Automatic power off

Use AUTO OFF to set how long until the unit automatically turns OFF when powered by the internal battery. This setting is the amount of time from when track playback has stopped and the unit has last been used.

Setting choices: OFF (factory setting, the power must be turned off manually), 3 min, 5 min, 10 min, 30 min

Automatically turning off the backlight

Use BACKLIGHT to set the time since the last operation	Setting choices: OFF (backlight always on), 5 sec (factory
until the backlight automatically turns OFF when	setting), 10 sec, 15 sec, 30 sec
powered by the internal battery.

Display contrast

Use CONTRAST to adjust the display contrast.

Setting choices: 1–20(factory setting: 12)

Backlight brightness

Use DIMMER to adjust the backlight brightness.

Setting choices: HIGH (factory setting), LOW, OFF (no backlight)

Initializing the unit

Use INITIALIZE to restore the MP-VT1 to its factory settings.

1Select INITIALIZE and press the ENTER key to highlight Exec.

2Press the ENTER key again to open a confirmation popup window.

3Press the ENTER key again to initialize the unit. Press the MENU key to cancel initialization.

22 TASCAM MP-VT1