Tascam MP-VT1 About the power supply, Recharging the battery, Turning the power on and off

Page 4

1 – Introduction

About the power supply

The MP-VT1 uses a built-in lithium ion battery that can be recharged by connecting the unit to a computer with the included USB cable. You can also use an AC adapter (sold separately) to power the unit and recharge the battery.

When new, the battery charge lasts about 8 hours.

NOTE

When you purchase the MP-VT1, the battery is not fully charged. Please charge it before use or use it with an AC adapter (sold separately).

Recharging the battery

Recharging with a computer

To charge the battery using a computer, connect the unit to the computer using the included USB cable and turn the computer on if it is off and not transmitting power to the unit.

Connect the MP-VT1 directly to the computer. Recharging cannot be guaranteed if a USB hub is used between the computer and the MP-VT1.

Recharging takes about 6 hours (when the MP-VT1 power is OFF).

If the MP-VT1’s power is turned ON when it is being recharged from a computer, it is automatically treated by the computer as a connected USB drive. (See “Connecting to a computer” on page 11.)

Recharging with a PS-P520 AC adapter (sold separately)

Connect the AC adapter to the MP-VT1’s DC IN 5V jack and plug the adapter into a working power outlet.

Recharging takes about 3 hours.

You can use the MP-VT1 when it is connected to an AC adapter and recharging.

Furthermore, the recharging time is the same whether the MP-VT1 power is ON or OFF.

NOTE

The indicator at the right side of the display shows the battery’s charging status. It lights orange while charging and goes out when charging is complete.

Battery indicator

Turning the power on and off

To turn the MP-VT1 power on

Slide the POWER switch in the direction of the arrow and hold it until TASCAMappears on the screen. Release the switch.

The MP-VT1 starts and the home screen appears.

To turn the MP-VT1 power off

Slide the POWER switch in the direction of the arrow and hold it until Trainer seriesappears on the

screen. Release the switch. The MP-VT1 then shuts down.

TASCAM MP-VT1

Image 4
Contents MP-VT1 Contents Supplied accessories Precautions for placement and useIntroduction Manual conventionsRecharging the battery About the power supplyTurning the power on and off Part names and functions Top PanelFront Panel Right Side PanelLeft Side Panel Back PanelHome screen Play area Connecting headphones or speakers Connecting a micConnections & MP3 Transfer Making connectionsConnecting to a computer Disconnecting from a computerMoving MP3 files to the the MP-VT1 Copying tracks from a computerMenus & Settings Using the MenusMenu items Menu overviewTurn the wheel to choose the desired value Playing and Selecting Tracks Using the Browse screen to select tracksBasic track playback functions Setting the play area Adding tracks to the playlist Using the playlistEditing the playlist Repeat and single-track playback Play Mode Move Change the order of tracksPractice Functions Canceling mic sounds Voice CancelChanging playback pitch and tempo Connecting a mic to practice Using the metronome MetronomeRepeat playback of a selected loop Practicing with tracks as they playUsing Effects Chromatic tuner mode Using the TunerOscillator mode OSC Setup Menu Options Formatting the unit quickly Formatting the unit completelyUsing the Information Pages File information page FileEffect preset list Effect ListsMessages File not foundFile Error Recycling the Battery How to remove the rechargeable batterySpecifications Other specificationsRated audio input and output Audio performanceStored settings DimensionsMP-VT1