Heat Controller VMH 30 manual Test Operation

Page 10

Installation, Operation & Maintenance

VMH 30/36 SERIES

Heat Controller, Inc.

 

 

 

OUTDOOR SECTION

5TEST OPERATION

3.Safety and leakage check

Use soapy water or a leakage detector to check for leaks as follows:

1.Soap water method:

Apply a soap solution water or a liquid neutral detergent onto the indoor unit connections and outdoor unit connections with a soft brush to check for leaks in the connections of the piping.

If bubbles room, it indicates that the pipes have leaks.

Indoor unit

D

C

2. Leak detector

 

Use the leak detector per the manufacturer’s instructions

check point

 

 

 

 

 

to check for leakage.

 

 

 

 

CAUTION NOTE:

 

Cover

 

 

 

 

 

 

A: Lo pressure valve

B: Hi pressure valve

 

 

 

C and D are ends of indoor unit connection.

Outdoor unit

B

A

 

 

 

 

check point

 

 

4. Test running

Perform a test run after completing the leak check:

Check that all tubing and wiring have been properly connected.

Check that the gas and liquid side service valves are fully open.

1.Connect the power, press the ON/OFF button on the remote controller to turn the unit on.

2.Use the MODE button to select COOL, HEAT, AUTO and FAN to check if all the functions work properly.

3.When the ambient temperature is lower than 62OF(17OC), the unit cannot be controlled by the remote controller to run in cooling mode, manual operation needs to be used.

Hold the panel sides and lift the panel up to an angle until it remains fixed with a clicking sound. Press the Manual control button to select the AUTO or COOL, the unit will operate under Forced AUTO or COOL mode(see User Manual for details).

4.The manual test operation should last about 30 minutes, giving the installing contractor an opportunity to check that the unit is operating properly and the installation was done successfully.

Manual control

AUTO/COOL

Button

 

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Inverter Single Zone Ductless Mini Split Heat Pump Safety Precautions Indoor unit Name of Accessories QtyOutdoor unit Fit the Installation Plate Indoor SectionConnective Pipe and Drainage Installation O O R I T Outdoor Section Settlement of outdoor unitRefrigerant Pipe Connection When using the Vacuum Pump Air purgingTest Operation 12/2/11

VMH 30 specifications

The Heat Controller VMH 30 is an advanced heating solution designed to provide efficient temperature control in various settings. This versatile unit is perfect for both residential and commercial spaces, making it a popular choice among homeowners and business owners alike. Known for its sleek design and high performance, the VMH 30 has garnered a positive reputation in the market.

One of the standout features of the VMH 30 is its energy efficiency. It incorporates cutting-edge technologies that significantly reduce power consumption while maintaining optimal heating capabilities. The unit operates with a high Energy Efficiency Ratio (EER), ensuring that every kilowatt of electricity is utilized effectively. This not only contributes to lower energy bills but also promotes environmentally friendly usage.

The VMH 30 is equipped with advanced inverter technology, allowing it to adjust its heating output based on the room's temperature requirements. This dynamic capability results in a more accurate and stable climate control environment, enhancing comfort for its users. The inverter system also operates quietly, making it suitable for use in noise-sensitive areas, such as bedrooms and offices.

Another notable characteristic is its user-friendly interface. The VMH 30 comes with a digital thermostat that simplifies temperature management. Users can easily set their desired temperature and monitor the unit’s performance via an intuitive display. Many models also offer remote control capabilities through Wi-Fi connectivity, enabling users to adjust settings from their smartphones, even when they're not at home.

The VMH 30 is also designed with durability in mind. It features robust construction, ensuring that the unit withstands the test of time and performs consistently throughout its lifespan. The materials used in its build are resistant to corrosion and wear, providing added reliability.

In terms of installation, the VMH 30 offers flexibility, as it can be mounted on walls or ceilings, making it adaptable to different room layouts. Additionally, its compact size means it won’t occupy much space, allowing for optimal utilization of your room’s area.

Overall, the Heat Controller VMH 30 combines efficiency, performance, and user-friendly features to deliver a comprehensive heating solution. Its innovative technologies and thoughtful design makes it a preferred choice for those seeking reliable climate control. Whether used in a cozy home or a bustling office, the VMH 30 promises comfort and satisfaction throughout its entire operational life.
Top Page Image Contents