Connective Pipe and Drainage Installation

Heat Controller, Inc.	VMH 30/36 SERIES	Installation, Operation & Maintenance

INDOOR SECTION

3CONNECTIVE PIPE AND DRAINAGE INSTALLATION

Drainage

1.Run the drain hose sloping downward. The figures on the right show improper installation methods.

2.When connecting extension drain hose, insulate the connections, do not let the drain hose slack.

Connective pipe installation

1.For the left-hand and right-hand piping, remove the pipe cover from the side panel.

2.For the rear-right-hand and rear-left-hand piping, install the piping as shown.

3.Bundle the tubing, connecting cable, and

drain hose with tape securely, evenly as shown in Figure on the right.

Because the condensed water from rear of the indoor unit drains to the ponding box before drainage through the drain hose, be sure not to place anything inside the ponding box.

CAUTION

Connect the indoor unit first, then the

outdoor unit. Do not allow the piping to come out from the

back of the indoor unit.

Be careful not to let the drain hose slack.

Heat insulate both the auxiliary piping.

Be sure that the drain hose is located at the lowest side of the bundle. Locating at

the upper side can cause drain pan to overflow inside the unit.

Never intertwine the condensate piping the power the power wire with any other wiring.

Run the drain hose slopped downward to drain out the condensed water freely.

Indoor unit installation

1. Pass the piping through the hole in the wall.	Insulation
2. Hook the indoor unit onto the upper portion
of installation plate(Engage the indoor unit with
the upper edge of the installation plate). Ensure
the slots are properly seated on the installation
plate hooks by moving it in left and left.
3. Piping installation can easily be done by placing
a temporary piece of styrofoam between the
unit and the wall. After piping is complete, be
sure to remove the styrofoam.

4. Press the lower left and right side of the unit against the installation plate until the slots hook onto and engage with the installation wall plate.

VMH 30 specifications

The Heat Controller VMH 30 is an advanced heating solution designed to provide efficient temperature control in various settings. This versatile unit is perfect for both residential and commercial spaces, making it a popular choice among homeowners and business owners alike. Known for its sleek design and high performance, the VMH 30 has garnered a positive reputation in the market.

One of the standout features of the VMH 30 is its energy efficiency. It incorporates cutting-edge technologies that significantly reduce power consumption while maintaining optimal heating capabilities. The unit operates with a high Energy Efficiency Ratio (EER), ensuring that every kilowatt of electricity is utilized effectively. This not only contributes to lower energy bills but also promotes environmentally friendly usage.

The VMH 30 is equipped with advanced inverter technology, allowing it to adjust its heating output based on the room's temperature requirements. This dynamic capability results in a more accurate and stable climate control environment, enhancing comfort for its users. The inverter system also operates quietly, making it suitable for use in noise-sensitive areas, such as bedrooms and offices.

Another notable characteristic is its user-friendly interface. The VMH 30 comes with a digital thermostat that simplifies temperature management. Users can easily set their desired temperature and monitor the unit’s performance via an intuitive display. Many models also offer remote control capabilities through Wi-Fi connectivity, enabling users to adjust settings from their smartphones, even when they're not at home.

The VMH 30 is also designed with durability in mind. It features robust construction, ensuring that the unit withstands the test of time and performs consistently throughout its lifespan. The materials used in its build are resistant to corrosion and wear, providing added reliability.

In terms of installation, the VMH 30 offers flexibility, as it can be mounted on walls or ceilings, making it adaptable to different room layouts. Additionally, its compact size means it won’t occupy much space, allowing for optimal utilization of your room’s area.

Overall, the Heat Controller VMH 30 combines efficiency, performance, and user-friendly features to deliver a comprehensive heating solution. Its innovative technologies and thoughtful design makes it a preferred choice for those seeking reliable climate control. Whether used in a cozy home or a bustling office, the VMH 30 promises comfort and satisfaction throughout its entire operational life.