Freecom Technologies Flash MP3 user manual Start up Hardware Installation

Page 8

GB

USA

1

CHAPTER 1: Start up - Hardware Installation

1.1 Inserting battery & connecting headphone

1.Unlock battery cover by sliding the battery hold switch in the direction shown.

2.Slide the battery cover in the direction shown to open the battery cover.

3.Insert one AAA-size battery as shown, with the – side touching the spring inside the battery cover.

Note: Batteries contain chemical substances. When empty, they should be properly disposed of.

4.Slide the battery cover back.

5.Lock the battery cover by sliding the lock-switch back.

6.Insert the headphone jack into the headphone connector, as shown.

8

Image 8
Contents USA USA Chapter Cover labels Precautionary measures Device description Display panel Start up Hardware Installation Connect the Beatman Flash to your PC Installing the Digital Audio Manager software Installation of the Digital Audio Manager software Driver Installation Installing driver Windows 98 SE USA Installing driver Windows USA Installing USB driver under Windows XP USA Every day use Description of the menus Operating instructions Hold On/Off Fast Backward & Fast Forward USA USA Erase MIC USA Troubleshooting USAUSA Technical Specifications Federal Communications Commission Declaration of Conformity