Setting the LCD light
1 After pressing the MENU button in the Playback or Stop mode, select the LCD light using the REW/FF button.
2 Select the time you want using the REW/FF button.
●You can set the flashing time of the LCD light by 7 steps (2 – 7 seconds) after button manipulation.
➡ ➡
➡ ➡
➡ ➡
3 Press the MENU button again to save the setting.
24
Setting the display
You can check file name, playback time or remaining playback time (or available recording time), depending on the settings.
1 After pressing the MENU button in the Playback or Stop mode, select the Display using the REW/FF button.
2 Select information you want using the REW/FF button.
The elapsed time of current recording or playback is displayed.
➡
The remaining playback time is displayed.
The available recording time is displayed while recording.
3 Press the MENU button again to save the setting.
25