Bluetooth

HDD Power Management

●Enable/Disable HDD power savings mode.

●If set to ‘Enabled’, playback time would be extended, but system response may slow down.

Charge During operation

●Enable/Disable Charging via AC adapter while in use.

●If set to ‘Disabled’, AC adapter will only be used as an external power source, and will

not charge COWON Q5W.

●Boot loader version: Displays current booting loader version installed

●Firmware version: Displays current firmware version installed

●Application Version (program version) : Displays current program version installed

●Hard Disk Total Capacity: Displays total HDD capacity

●Hard Disk Remaining Capacity: Displays remaining storage space in HDD

Built-In Bluetooth Pan Settings and connecting to Bluetooth device(s)

Alternative way to access Bluetooth mode:

Control Panel (under WinCE) -> Bluetooth Device Properties

●Detecting active Bluetooth device(s) near COWON Q5W. Bluetooth option (under ‘Bluetooth Device’ settings) must be turned on.

●Perform ‘Pairing’ with Bluetooth device found from search

●Use the same passcode for COWON Q5W and Bluetooth device during ‘Pairing’ in order to establish Bluetooth connection.

●Establish connection between COWON Q5W and Bluetooth Device. ‘Pairing’ must be done in the initial connection.

Disconnect

●Disconnect selected Bluetooth device connection.

●Delete Bluetooth Device list from the search

When settings window closed, Bluetooth connection remains active after connection is made properly.

COWON Q5W