Before Use 
15
6. Power Connection and Charging
To charge iAUDIO U3, connect the player to a PC using a USB cable or connect to the AC adapter.
1. Connect the AC adapter to | 2. Once connected, player | 3. After the player is fully charged, |
each outlet and the USB jack on | will automatically power on | the following screen appears on |
the player. | and charge at the same time. | the LCD. |
If this is either the first time the player is used or has not been used for a long time, use the player after fully charging it with theAC adapter.
-For your safety, use the AC adapter supplied with the player.
-AC adapter is for both 110V and 220V, and is sold separately.
7. PC Connection and Charging
1. Connect the supplied USB cable | 2. If properly connected, player will | 3. Check the recently added drive |
to the USB jack of the player and | start to charge while the following | from Windows Explorer. |
your computer. | screen appears on the LCD. |
|
-If this is either the first time the player is used or has not been used for a long time, use the player after fully charging it by connection to your PC.
-Install a separate driver for Windows 98 and 98 SE operating systems.
-This player can recognize up to 100 folders and 1000 files.