Symptom | Solution |
Product neither re- | Check if the same phenomenon |
sponds nor operates. | occurs even after connecting the |
| AC adaptor or USB cable. |
| Press the RESET button at the |
| bottom of the product. |
No sound can be | Check if there are any audio fi les |
heard. | stored in iAUDIO. |
Troubleshooting 
65
Description
Charge with the adapter before use if the
iThis feature converts the product state to Power OFF when the product does not operate properly.
iAUDIO does not start playback if there is no music fi les.
Check if the volume is set to “0”. Check the remote controller and earphone connec- tions and see if there are any substances blocking connection. (Noise may occur if dust or other substances is covering the terminal.) Damaged music files will either create noise or be played brokenly.
Nothing is heard from FM radio reception may become poor or static may be heard depending where the
FM radio.player is used, such as inside buildings or subways and moving vehicles. Listening to FM radio may be impossible in areas shaded from radio transmissions
If FM radio does not work where reception should be possible, there may be a problem in the reception module. In this case, please contact our service center.
Characters on LCD are See ‘Initializing to Factory Default’ in this manual and format the player, then reset
corrupted.language. Use fi lenames in the Title setting. If this phenomenon occurs in all iAUDIO devices, then this is because this player was initially developed based on