Cowon Systems E2 manual +Charging

Before you start!

+Charging

To charge iAUDIO E2, use the USB cable to connect the product to the PC.

iAUDIO E2 supports USB charging only.

PC 2 1

※Connect part 11 first, and then connect part 2 .

The red LED lamp appears when charging, and it takes about 1.5 hours before it is fully charged.

The green LED lamp appears when fully charged.

-If you use the ‘Safely remove the hardware’ function in Windows to remove the USB from iAUDIO E2, charging will not take place.

-When charging the player for the first time or the player has not been charged for an extended time, fully charge the battery before use.

-iAUDIO E2 has a built-in Lithium Polymer battery. To prolong the life of the battery, it is recommended that you charge the device frequently, as opposed to fully discharging and then charging the device.

-When connected to a USB hub, the player may not charge properly. Please try connecting the player directly to a USB port on the PC.

-For safety during charging, use USB cable approved by COWON SYSTEMS, Inc.

iAUDIO E2 11