Connect the DMP-210/220 to the PC

§Open the battery compartment and insert the battery supplied with this package. Be sure to match the correct polarity.

§Press the Play button to turn on the DMP-210/220. The

DMP-210/220 must be powered on before connecting to the computer via the USB port.

§Connect the type “A” end of the USB cable to the USB port on your computer. (This is the flatter, rectangular end of the USB cable)

§Connect the other end of the USB connector on the DMP-210/220. (This is the smaller, square end of the USB cable)

§Windows will detect and load all necessary drivers when the DMP-210/220 is connected to the USB port for the first time.

Note: Windows 2000 users may be prompted by a “Digital Signature Not Found” screen. Click “Yes” on each screen to allow the installation to continue.