Philips PET941A/37 user manual Charge the battery, Install remote control battery

Page 16

Charge the battery

Caution

Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the bottom of the player.

Use only the supplied AC adaptor to charge the battery.

Note

The type plate is located on the bottom of the player.

You can only charge the player when it is in power-off mode.

1

2

Slide the POWER ON/OFF switch to OFF position.

Connect the supplied AC adaptor to the player and to the AC outlet.

»The charge indicator turns on. It takes about 7 hours to fully charge the battery.

»When the battery is fully charged, the charge indicator turns off.

Install remote control battery

Caution

Risk of explosion! Keep batteries away from heat, sunshine or fi re. Never discard batteries in fi re.

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Risk of product damage! When the remote control is not used for long periods, remove the batteries.

Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/ perchlorate.

16EN

Image 16
Contents ES Manual del usuario FR Mode d’emploi Canada Page C d Contents Page English Important safety instructions Hearing safety Recycling Set by the directive for lead Your portable DVD player IntroductionWhat’s in the box Overview of the main unit seeOverview of the remote control see Repeat 1/ALLGet started Charge the battery Install remote control batteryConnect additional equipment Use your player Turn onSelect OSD language Play discsAdjust brightness of screen backlight Play optionsAdjust settings Product information Ntsc & PALTroubleshooting