IBM 5000 manual Adding Security, Installing a U-Bolt, Cable

Adding Security

Adding Security

You	can	add	elements to your server	to help to	protect the	server
and	tampering,		and to help to protect	the data	and programs	stored in
from unauthorized access and use.
Installing a U-Bolt	and	Security	Cable

You can help to deter unauthorized removal of your tower model Netfini server by installing a U-bolt and security cable on the rear of your

Before you begin

Ÿ Obtain the following:

–A U-bolt

–A flat-blade screwdriver

–	An	adjustable		wrench
–	A	19 mm	(3/4	in.)	U-bolt	or	wire	rope	(similar to National Manuf
	No. 3230, Stock No. 176-735)
–	Threaded nuts			that	fit	the	U-bolt
–	A	security cable
–	A	lock,	such	as a combination lock or padlock
Ÿ Read		“Electrical		Safety” on		page 41		and	“Handling Static-Sensitive De
on	page 42.

To install a U-bolt and security cable:

1. Remove the server cover. See “Preparing to Install Options” on page

2. Insert the U-bolt through the holes and secure it in place with

74 Netfinity 5000 Server Hardware Information and Procedures