IBM 5000 Date and Time, System Security, Using the Configuration/Setup Utility, SelectDate and

Using the Configuration/Setup Utility

You can configure the IDE channel (enabled or disabled) and view the Master Device (type, size, transfer selection and mode, and logical b addressing (LBA) mode).

To display or change the port assignments:

1.SelectDevices and I/O Ports.

2.Select a device or port; then, use←) theor RighLeft AArro→) w key( to advance through the settings available.

Date and Time

Select this		choice	to	set	the	system	date and	time.
The	system	time is in a 24-hour				format: hour/minute/second. The system d
in	standard	format for your country. For example, in the United States
is	MM/DD/YYYY	(Month/Day/Year).
SelectDate and		Time ;	then,	use	the	Left←)	oArrowRight(	Arrow→) key( to

advance through each data field. Type the new information; the system information as you type it.

System Security

To control access to the information in your server, you can implement s features, such as adding passwords and defining a system owner's name displays during startup. Implementing these security measures helps you the integrity of the data and programs that are stored in your serv

Note:

The

default

values

for

all security-related

data

fields

are

give

on

page

164

and following.

After

setting

a

power-on

password,

you

can enable

the

unattended-start

This

locks the keyboard

and

mouse,

but

allows the

server to

start

the

system. The keyboard and mouse remain locked until you enter the corre password.

To set, change, or delete a password:

1.SelectSystem Security.

2.	Select	the	password	that	you	want to change.
3.	Follow	the	instructions	on	the	screen.

After you have set a power-on or administrator password, you must ente password whenever you turn on the server. (The passwords do not appea screen as you type them.)

24 Netfinity 5000 Server Hardware Information and Procedures