The Configuration/Setup Utility
6. Resolve configuration conflicts.
See “Resolving Configuration Conflicts” on page 30.
The Configuration/Setup | Utility |
|
|
|
|
|
|
|
For | most configurations, the server will | operate | using | the | default | sy | ||
You | need to change the settings only | to | resolve configuration | conflict | ||||
or | change device functions. |
|
|
|
|
|
|
|
When you want or need to change the | default | settings, | the | Configura | ||||
Utility program provides a convenient way | to display | and | change | the | ||||
After you run and exit the Configuration/Setup Utility program, configu information is stored in nonvolatile
Always run the Configuration/Setup Utility program if you add or remov hardware option, or if you receive an error message instructing you Review this chapter and the information that comes with the option b changes. Also, record the current settings (see Chapter 7, “Server Rec Specifications” on page 161) before making any changes.
To start the Configuration/Setup Utility program:
1. Turn on the server and watch the screen.
2.When the messagesPress F1 for Configuration/Setup andPress F2 for
Diagnostics appear, select the action you need.
Ÿ To configure your server, press Configuration/SetupF1 to selectUtility.
The Configuration/Setup Utility main menu appears. For information a the menus, see “Using the Configuration/Setup Utility” on page 2
Note: If | you | enter a | password and | an | administrator | pas |
has | been | set, a limited | menu appears | on | the screen. | To |
the full Configuration/Setup Utility menu, you must enter th administrator password.
ŸTo run the system diagnostics, pressDiagnosticF2 toUtilityselect.
The | Diagnostic Utility | main | menu appears. For information about ru |
the | system diagnostics, | see | “Diagnostic Test Programs” on page 1 |
Important
If a defective PCI adapter is causing the system to stop re startup, you can Alt+F1press here. This will cause the server to bypa PCI device initialization (except video) and go directly to the
Configuration/Setup Utility , where you can disable the defective PCI adapter. Disabling the defective PCI adapter should enable you complete a normal startup when you restart the server.
Chapter 3. Configuring Your Server21
