IBM 5000 manual Completing the Installation, Completing the Tower Model Installation

Completing the Installation

Completing the Installation

Before you begin

ŸComplete all the installation procedures for the internal options you

chosen	to install.
Ÿ Read	“Electrical Safety” on page 41.

ŸIf you have a tower model, continue with “Completing the Tower Model Installation.”

Ÿ If	you have a rack model, go to “Completing the Rack Model Installat
page	79.

Completing the Tower Model Installation

1. Install the cover on the server.

a. Align

the

left-side cover with the

left side

of

the

server,

a

inch)

from

the front of the server;

place the bottom

of

the

le

the

bottom

rail of the left-side

frame.

b. Insert the tabs

at

the

top of

the

cover

into

the

slots at

t

side.

c. Hold

the

cover against the server and

slide

the

cover

toward

the

server

until

the

cover

clicks

into

place.

Note: Be sure the front edge of the cover is flat against the

76 Netfinity 5000 Server Hardware Information and Procedures