IBM 5000 Hazard, do not connect or disconnect any, This, Shock hazard, Must, Also, Surfaces, With

1

DANGER

To

avoid

a

shock

hazard, do not connect or disconnect any

cables

or

perform

installation,

maintenance,

or

reconfiguration

of

this

product

during

an

electrical

storm.

To

avoid

shock hazard:

–

The

power

cord

must be connected to a

properly wired

and

earthed

receptacle.

–

Any

equipment

to

which

this

product

will

be

attached

must

also

be

connected

to

properly wired

receptacles.

When

possible,

use one

hand

to

connect

or

disconnect

signal

cables

to

prevent

a

possible

shock

from

touching

two

surfaces

with

different

electrical

potentials.

Electrical

current from power, telephone, and communications

cables

is

hazardous.

To

avoid

shock

hazard,

connect

and

disconnect

cables

as

described

following when

installing,

moving,

or

opening

covers

of

this

product or attached

devices.

To Connect	To Disconnect
1. Turn Everything OFF.	1. Turn Everything OFF.

2. First, attach all cables to devices2.First,. remove power cord(s) from

outlet.

3. Attach signal cables to receptacles.

4. Attach power cord(s) to outlet.3. Remove signal cables from receptacles.

5. Turn	device ON.	cables from devices.
	4. Remove all
NOTE: In	the UK, by law, the telephoneNOTE:In the	UK, the power cord	must be
cable must be connected after thedisconnectedpow r		after the telephone	cable.
cord.

viii Netfinity 5000 Server Hardware Information and Procedures