Identifying Problems Using Status LEDs
Identifying Problems Using Status LEDs
Your Netfinity 5000 server has LEDs to help you identify problems with server components. These LEDs are part of the diagnostics built into 5000 server. By following the path of lights, you can quickly identify system error that occurred.
Status LEDs are located on the following components:
ŸOperator LED panel
For more information, see “Status Indicators” on page 9.
ŸHard disk drive trays
For more information, see “Server Controls” on page 7.
ŸPower supply
For more information, see “Power Supply LEDs.”
ŸSystem board
See “System Board LEDs” on page 168 for locations of the LEDs on t system board.
Power Supply LEDs
The AC Power LEDs on the power supply provide status information about power supply. See “Status Indicators” on page 9 for the location of
The following table describes the AC Power LEDs.
AC Power LED | Description | and | Action |
|
|
| |
On | The power | supply | is | on and operating correctly. | |||
|
|
|
|
|
| ||
Off | There | is | an AC power | problem. | |||
| Possible | causes: |
|
|
| ||
| 1. There | is no AC power to the power supply. | |||||
| Actions: | Verify | that: | ||||
| Ÿ | The | power cord is properly connected to the Netfinity | ||||
|
| 5000 |
| server. |
|
|
|
Ÿ The power outlet functions properly.
2.The power supply has failed.
Action: Replace the power supply.
If the problem persists, have the system serviced.
Chapter 6. Solving Problems 153
