Installing Microprocessors
Note: When you install a second microprocessor, it becomes the start (boot) microprocessor.
3. Carefully remove the microprocessor from the
4. If | you are replacing a microprocessor, remove the existing micropr |
its | socket. Otherwise, go to step 5. |
a. Locate the microprocessor socket on the system board. (See the illustration in “System Board Illustration” on page 168.)
b. Place your index fingers on the small retainer tabs on the top microprocessor. Push in toward the microprocessor until the tabs r
Note: The illustrations in this section might differ slightly from y hardware.
Tabs
c. Lift the microprocessor out of the connector.
d. Store the old microprocessor in a
5. Touch the | package that | contains the | new | microproces |
any unpainted metal surface in | the server; | then, remove | the | new |
microprocessor. |
|
|
|
|
