IBM 5000 manual Checking the System for Damage, After Dropping It, After Spilling Liquid on

Checking the System for Damage

Checking the System for Damage

This section provides instructions on what to do if your system might

After Dropping It

Look	for	loose	cables and		obvious damage. If		any cables are loose,	r
them securely.			If there		is	obvious damage to	the system, have it	se
If	you	see	no	damage,	turn	on the system. If it works correctly,		th
probably		did	not	suffer	any	damage.

If the system does not work correctly, turn it off and check the a memory modules to ensure that they are connected correctly. Go to “Ele Safety” on page 41 and follow the instructions for opening your system; reseat all adapters and memory modules.

If the system still does not work correctly, run the diagnostic tests utility menu. For information about running tests, see “Running Diagnostic Te Programs” on page 112.

After Spilling Liquid on

It

If

liquid

gets

on

the

keyboard:

1. Turn

off

the server.

2.

Unplug

the

keyboard

from

the

back

of

the server.

3.

Turn

the

keyboard upside

down

to

drain

excess liquid.

4.

Dry off the keyboard with a

lint-free

cloth.

After

the

keyboard

is

completely

dry, plug it in and turn on the ser

work

correctly,

have

the

keyboard

serviced.

If liquid gets inside the monitor:

1.Turn off the monitor.

2.Turn off the server.

3.

Unplug

the

monitor

from

the

server and

the electrical

outlet.

4.

Have the monitor serviced immediately.

If

liquid

gets

inside

the

server:

1. Turn

off

the server

and

all

attached

devices.

2.

Unplug

the

server

from

the

electrical

outlet and all

attached devi

3.

Have

the

server

serviced

immediately.

158 Netfinity 5000 Server Hardware Information and Procedures