Heat Controller DVC/DVH SERIES manual Timer Operation, To SET the AUTO-OFF Time

Heat Controller DVC/DVH Remote Controller

Remote Operation

TIMER OPERATION

Press the TIMER ON button to set the time the unit should automatically turn on. Press the TIMER OFF button to set the time the unit should automatically turn off.

1.Press the TIMER ON button. The remote controller show TIMER ON, the last Auto-on set time and the “H” icon will be shown on the LCD display. Now it is ready to reset the Auto-on time to START operation.

2.Push the TIMER ON button again to set desired Auto- on time. Each time you press the button, the time increases by half an hour between 0 and 10 hours and by one hour between 10 and 24 hours.

3.After setting the TIMER ON, there will be a one second delay before the remote controller transmits the signal to the air conditioner. Then, after approximately another 2 seconds, the “H” icon will disappear and the set temperature will re-appear on the LCD display.

TO SET THE AUTO-OFF TIME

1.Press TIMER OFF button. The remote controller show TIMER OFF, the last Auto-off setting time and the “H” icon will be shown on the LCD display area. Now it is ready to reset the LCD display area. Now it is ready to reset the Auto-off time to stop the operation.

2.Push the TIMER OFF button again to set desired Auto-off time. Each time you press the button, the time increases by half an hour between 0 and 10 hours and by one hour between 10 and 24 hours.

3.After setting the TIMER OFF, there will be a one

second delay before the remote controller transmits the signal to the air conditioner. Then, after

1approximately another 2 seconds, the signal “H” will disappear and set the temperature will re-appear on the LCD display.

11