Philips HDD100 Select your Recording Mode, To start recording, To pause and continue recording

Select your Recording Mode

1If you want to make an analogue or digital line-in recording, connect to your recording source to the OPTICAL /LINE IN jack on your Jukebox.

➔The recording source screen is automatically displayed.

●To make a microphone recording, you will need to press MENU/ HOLD to select the Record Mode menu.

2Use the 4 or 3 and 2 controls to scroll and select your type of recording source:

– Record Optical	for an Optical source
– Record Line	for a Line-insource
– Record Mic	for built-in microphone source

➔Record Mode screen is displayed.

To start recording

During recording, the display shows a VU meter indicating the left

(L)and right (R) channel input levels, recording bitrate in Kbs, recording source and track number, and the soft key controls for Stop and Pause.

For Line-in and Optical

1Use a connection cable (not supplied) to connect the OPTICAL OUT/ LINE OUT jack on your audio recording source to the OPTICAL/ LINE IN jack on your Jukebox.

2Press play on your connected audio source.

3Press 4 to start recording on your Jukebox.

For microphone recordings

●Press 4 to start recording on your Jukebox.

To pause and continue recording

●Press 2 to pause recording on your Jukebox. Press 4 again to resume.

To stop / end recording

1Press 1 to end recording on your Jukebox.

2Press 1 again to exit the recording function.

TIP:

–Recording is not possible when your Jukebox is connected via the USB.

–The remote control keys are disabled during recording mode.

26