Warning
•Never remove the casing of this player.
•Never lubricate any part of this player.
•Never place this player on other electrical equipment.
•Keep this player away from direct sunlight, naked flames or heat.
•Never look into the laser beam inside the player.
•Ensure that you always have easy access to the power cord, plug or adaptor to disconnect the player from the power.
How to connect a plug
The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live
(L).
As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows:
•Connect the blue wire to the terminal marked N or coloured black.
•Connect the brown wire to the terminal marked L or coloured red.
•Do not connect either wire to the earth terminal in the plug, marked E (or e) or coloured green (or green and yellow).
Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires.
Mains plug
This apparatus is fitted with an approved 13 Amp plug.To change a fuse in this type of plug proceed as follows:
ARemove fuse cover and fuse.
BFix new fuse which should be a BS13625 Amp,A.S.T.A. or BSI approved type.
CRefit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp.
The severed plug must be disposed off to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere.
Norge
Typeskilt finnes på apparatens bakside.