Philips PET712/05, PET712/12 Troubleshooting, Select audio output, Select digital audio output

Press SETUP.

Select [Audio] > [Digital (SPDIF)].

Select an option, then press OK to confirm. Press SETUP to exit.

Select audio output

1 Press SETUP.

2 Select [Audio] > [Dolby].

3 Select an option, then press OK to confirm.

4 Press SETUP to exit.

Select digital audio output

If you connect the player to a sound system that supports digital sound, select a compatible digital audio output format.

1

2

3

4

6 Troubleshooting

Warning

•Never remove the casing of this player.

To keep the warranty valid, never try to repair the system yourself.

If you encounter problems when using this player, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.Philips.com/support), or contact Philips (see Contact information). When you contact Philips, ensure that your player is nearby and the model number and serial number are available (see ‘Get started’ on page 26).

No power

•Ensure that both plugs of the mains cord are properly connected.

•Ensure that there is power at the AC outlet.

•Ensure that the battery is inserted correctly.

•Ensure that the car adaptor is connected correctly.