10Additional information
Chapter 10:
Additional information
Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.
Problem | Remedy |
The power does not turn on. | • Connect the power plug to the wall outlet. |
| • Disconnect the power plug from the outlet, and insert again. |
| • Make sure there are no loose strands of speaker wire touching the |
| rear panel. This could cause the receiver to shut off automatically. |
| • If the power shuts off automatically, take the unit to your nearest |
| Pioneer authorized service center or your dealer for servicing. |
| • The unit may have been switched on using the wrong voltage |
| setting. Make sure you switch the VOLTAGE SELECTOR on the rear |
| panel to the right voltage for your country or region, then reset the |
| unit (page 72) before switching on again. |
| |
No sound is output when a • Make sure the component is connected correctly (refer to | |
function is selected. | Connecting up on page 14). |
| • Press MUTE on the remote control to turn muting off. |
| • Adjust the MASTER VOLUME. |
| |
No image is output when a • Make sure the component is connected correctly (refer to | |
function is selected. | Connecting up on page 14). |
| • Select the correct component (use the MULTI CONTROL buttons). |
|
|
70
En
