Pioneer VSX-D514 Using the SR+ mode with a Pioneer plasma display, 06Setting up the receiver

06Setting up the receiver

3Press MASTER VOLUME +/– to adjust the volume to an appropriate level.

4Use LEVEL +/– to adjust the speaker levels in turn.

You should hear the test tone at the same volume from each speaker when seated in the main listening position. The channel level range is ± 10 dB.

5When you’re done, press TEST TONE to turn off the test tone.

The receiver returns to the Standard mode.

•The speaker volume can be adjusted without outputting the test tone by pressing CH SELECT and then using LEVEL +/–. However, you can only adjust the level of the speakers currently active in the mode you’re listening to. You can set separate levels for the STANDARD, STEREO and DVD 5.1 ch modes, as well as for each ADVANCED SURROUND mode.

•Test tone is only output in STANDARD or ADVANCED SURROUND mode.

•Since the subwoofer transmits an ultra- low frequency its sound may seem quieter than it actually is.

•Using test tones to set up your speaker system will overwrite any previous settings you had for the STANDARD or ADVANCED SURROUND modes.

54

Using the SR+ mode with a Pioneer plasma display

VSX-D714/D814 only

When connected using an SR+ cable, a number of features become available to make using this receiver with your Pioneer plasma display even easier. These features include:

•On-screen displays when making receiver settings, such as speaker setup, MCACC setup, and so on.

•On-screen volume display.

•On-screen display of listening mode.

•Automatic video input switching on the plasma display.

•Automatic volume muting on the plasma display.

See also Using this receiver with a Pioneer plasma display on page 26 for connecting up, and SR+ control for Pioneer plasma displays on page 51 for setting up the receiver.

1Make sure that the plasma display and this receiver are switched on and that they are connected with the SR+ cable. See Using this receiver with a Pioneer plasma display on page 26 for more on connecting these components.

2To switch SR+ mode on/off, press RECEIVER, then the SR+ button.

The front panel display shows SR+ CHECK, then the new setting is displayed (SR+ ON or SR+ OFF).

•The automatic volume muting feature is enabled separately; see SR+ control for Pioneer plasma displays on page 51. (You can also use the System Setup menu to switch the SR+ mode of the receiver.)

En