05Listening to your system
Listening in stereo |
|
|
|
|
|
|
When you select STEREO or DIRECT, you will | ADVANCED | STEREO/ | SIGNAL | MIDNIGHT/ | SB CH | MULTI JOG |
hear the source through just the front left and | STANDARD SURROUND | DIRECT | SELECT | LOUDNESS | SPEAKERS MODE | TONE QUICK SETUP |
LISTENING MODE |
|
| DIGITAL IN | L AUDIO R | ||
|
|
|
| VIDEO INPUT |
| |
right speakers (and possibly your subwoofer | INPUT ATT FL DIMMER |
|
|
|
|
|
|
|
|
|
|
| |
depending on your speaker settings). Dolby |
|
|
|
|
|
|
Digital and DTS multichannel sources are |
|
|
|
|
|
|
downmixed to stereo. | * Illustration shows the | |||||
| ||||||
| • Press SIGNAL SELECT on the front | |||||
| panel to select the input signal corre- | |||||
| sponding to the source component. | |||||
| Each press cycles through the options as | |||||
STEREO/ | follows: |
|
|
|
|
|
DIRECT | • AUTO – This automatically switches to | |||||
| ||||||
| DIGITAL if a digital source is detected, | |||||
| otherwise it remains on ANALOG. | |||||
•While listening to a source, press STEREO/DIRECT for stereo playback. Press repeatedly to switch between:
•STEREO – The audio is heard with your surround settings and you can still use the Midnight, Loudness, and Tone control functions.
•DIRECT – Bypass all effects and surround settings so that the audio remains as close to the source audio signal as possible.
•If you switch on Midnight listening, Loud- ness, or the Tone controls when DIRECT is selected, the receiver automatically switches to STEREO.
Choosing the input signal
• Default setting: AUTO
You need to hook up a component to both analog and digital inputs on the rear of the receiver to select between input signals.
•DVD 5.1ch
•ANALOG – Selects the analog inputs.
•DIGITAL – Selects the digital input.
When set to DIGITAL or AUTO, 2 DIGITAL lights when a Dolby Digital signal is input, and DTS lights when a DTS signal is input.
•This receiver can only play back Dolby Digital, PCM
•You may get digital noise when a LD or CD player compatible with DTS is playing an analog signal. To prevent noise, make the proper digital connections (page 15) and set the signal input to DIGITAL.
•Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with your DVD player.
38
En
