Controls and displays
Display
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
x |
|
SP | A B |
11 12 | 13 | 14 | 15 | 16 |
1 SIGNAL SELECT indicators | 3 | 2 DIGITAL |
|
|
Lights to indicate the type of input signal | When the STANDARD mode of the receiver is | |||
assigned for the current component: | on, this lights to indicate decoding of a Dolby | |||
AUTO | Digital signal. |
|
| |
|
|
|
| |
04
English Italiano Français
Lights when AUTO signal select is on.
SB
Depending on the source, this lights when a signal with surround back channel encoding is detected.
DIGITAL
Lights when a digital audio signal is detected.
2DIGITAL
Lights when a Dolby Digital encoded signal is detected.
ANALOG
Lights when an analog signal is detected.
DTS
Lights when a source with DTS encoded audio signals is detected.
2
When the STANDARD mode of the receiver is on, this lights to indicate decoding of a DTS signal.
4 2 PRO LOGIC II (x)
When the (STANDARD) Pro Logic II mode of the receiver is on, this lights to indicate Pro Logic II decoding.
5 VIR.SB
Lights during Virtual surround back processing.
6 DIRECT
Lights when source direct playback is in use. Direct playback bypasses the tone controls and channel levels for the most accurate reproduction of a source.
7 MIDNIGHT
Lights during Midnight listening.
8 SLEEP
Lights when the receiver is in sleep mode.
9 ATT
Lights when INPUT ATT is used to attenuate (reduce) the level of the analog input signal.
Deutsch Nederlands Español
31
En
