Philips NP1100/37 Technical data, Supported audio file formats, Supplied accessories, Spdif

9	Technical data
General
AC Power			Voltage information is
			printed on the back or the
			underside of the NP1100.
DC Power			5 V / 1 A
Dimensions (w x 195 x 104 x 38 mm
h x d)
Weight (net)			approx. 0.44kg
Power consumption
On			< 5W
Standby (active)			< 4W
Audio output
Line out			2x Cinch, 500 mV, 20
			- 20000 Hz
SPDIF			1x Cinch (Coax), 0.5 V,
			75 Ohms
Headphone			1x 3.5 mm jack, 1 V, 30
			- 16000 Hz
Signal to noise ratio			typ. 85 dBA (IEC)
(line out)
Signal to noise ratio			typ. 75 dBA (IEC)
(heaphone)
Distortion (line out / < 0.3 %
headphone)
Wireless
Wireless		802.11g, backwards compatible to
standard		802.11b
Wireless		WEP (64 or 128 bit),
security		WPA/WPA2 (8-63 characters)
Frequency		2412 - 2462MHz CH1-CH11 (for
range		/79, /37, /17, /55, /97)
		2412 - 2472MHz CH1-CH13 (for
		/12, /05)
Antenna		2x internal, diversity mode enabled

Wired (LAN / Ethernet)

Wired standard	802.3 / 802.3 u
Speed	10 / 100 MBit/s
Mode	half / full duplex
Crossover detection	Yes

(Auto MDIX)

Display

Resolution	Dot matrix 128 x 64 dots
Size	4.1 inches

Specifications and external appearance are subject to change without notice.

Supported audio file formats

The NP1100 supports the following audio file formats:

•MP3 (8-320kbps and VBR)

•WMA (up to 192kbps)

•AAC (16-320 kbps and VBR16)

Note

•The display of the NP1100 supports directories with nesting up to a maximum of 8 levels.

Supplied accessories

•Remote control

•2 AAA batteries

•AC power adapter with cable

•RCA cable

PC connection requirements

The minimum requirements for PC connections are:

•Windows 2000 SP4 (or above) / XP SP2 / Vista

•Pentium III 500MHz processor or higher

•256MB RAM

•CD-ROM drive

24EN